BRICK & STONE VARNISH
High gloss brick and stone dressing for interior use.
- Dries to a smooth finish
- Good abrasion resistance
- For interior use only
- High gloss finish
- Surface Dry: 2.5 – 3 Hours
- Hard Dry: 9 – 10 Hours
- Recoating Time: 4 Hours
- Application: Brush or airless spray
- Thinning: Top Paints’ Mineral Turpentine, if necessary
- Spreading Rate: 9 – 10m²/litre, depending on surface porosity
- Cleaning: Top Paints’ Mineral Turpentine
- Coats: 2
- Stir thoroughly with a flat paddle before use
Do not apply to hot surfaces, this may cause bubbling.
All surfaces must be clean, dry, sound, free from grease, oil, dirt and other surface contaminants. Use Top Paints’ Degreaser to remove oil and grease, rinse thoroughly and allow to dry.
Remove any oil, grease, dirt or wax polish with Top Paints’ Degreaser. Rinse thoroughly with clean water and allow to dry.
Previously Painted Surfaces
Surfaces previously painted with Brick & Stone Varnish:
Remove flaking and loose material and remove any oil, grease, dirt or wax polish with Top Paints’ Degreaser. Rinse thoroughly with clean water. Allow to dry.
Weathered Brick & Stone Varnish surfaces:
Remove flaking and loose material as well as powdery material, all loose dust should be removed by brushing.
1, 5 litres
Store away from direct sunlight, heat and severe cold. Keep container sealed and avoid moisture contact.
For full Technical and Material Safety Data Sheets, please contact Top Paints (016) 362 1054 or send an enquiry to firstname.lastname@example.org