TOP TEX

A highly textured paint that can be applied with a ripple roller to hide uneven interior and exterior surface defects.

  • Ripple finish
  • Suitable for interior and exterior use
  • Excellent opacity
  • Surface Dry: 4 Hours
  • Hard Dry: 48 Hours
  • Recoating Time: 24 Hours
  • Application: “Ripple” roller
  • Thinning: Not recommended
  • Spreading Rate: 2 – 4m²/litre
  • Cleaning: Water
  • Coats: 1
  • Stir thoroughly with a flat paddle before and during use

Ensure that surface is clean, dry and sound before applying. Plaster mix must be free from loose, friable and soft material, and have a minimum thickness of 10mm.

New Surfaces

Unglazed Brick and Building Blocks
Clean surface and apply TOP TEX directly.

Cement Plaster:
Apply 1 coat of Top Paints’ Plaster Primer, allow to dry and apply TOP TEX.
Old surfaces

Chalky Surfaces:
Remove loose powder and particles by high pressure water jets or wire brushing, allow to dry. Apply 1 coat of Top Paints’ Plaster Primer, allow to dry and apply TOP TEX.

Surface previously painted with emulsion paint:

Surface must be clean and sound, apply TOP TEX directly.

Surface previously painted with gloss or sheen paint:

Sand to matt finish, remove dust, clean surface and apply TOP TEX directly.

Surface in poor condition:
Strip surface down and treat as new work.

Packaging
5 and 20 litres

Storage
Store away from direct sunlight, heat and severe cold. Keep container sealed and avoid moisture contact.

Caution
During Winter months painting should be restricted to between 09H00 and 15H00, in Summer painting can be done between 08H00 and 16H00. Exterior surfaces – Do not paint if rain is imminent.

For full Technical and Material Safety Data Sheets, please contact Top Paints (016) 362 1054 or send an enquiry to sales@toppaints.co.za