Alkaline resistant product for interior and exterior use. Its excellent opacity and filling properties makes it the perfect product to use on ceilings and as a primer on new cement surfaces.

  • Filling properties
  • Alkaline resistant
  • Matt finish
  • Interior and Exterior use
  • Available in white
  • Exceptional obliteration and coverage
  • Excellent opacity
  • Protective barrier
  • Touch Dry: 30 minutes – 1 hour @ 23°C
  • Recoating time: 4 hours @ 23°C
  • Spreading rate: 4 – 6m² / litre, depending on porosity of surface and application

New Surfaces

New cement plaster:
Ensure surface is in sound condition before paint is applied. Allow cement plaster to cure and dry for 28 days to avoid moisture entrapment or any paint failure. Remove plaster spatter and dust. Apply two coats Top Paints’ TREND WALL PRIMER and allow to dry.

New fibre-cement, bricks and composition boarding::
Remove dust and loose particles. Apply Top Paints’ Bonding Liquid and allow recommended drying time

Previously Painted Surfaces

Old paint in sound condition:
Clean surface and rinse thoroughly. Ensure that the old coating adheres to the substrate. Apply two coats of Top Paints’ TREND WALL PRIMER.

Previously painted with solvent based product:
Apply Top Paints’ Universal Undercoat and allow recommended drying time.

Powdery surface:
Sand down and remove dust. Apply Top Paints’ Bonding Liquid and allow recommended drying time before applying intermediate and final coats.

Fungal growth:
Remove fungal growth by using Top Paints’ Fungal Wash. Rinse thoroughly and allow to dry.

Previously painted surface in poor condition:
Strip and treat as new work.

Gypsum plaster:
Not recommended as a primer for gypsum plaster.

Use suitable and approved filler

5L and 20L (only white)

Keep away from direct sunlight, heat and severe cold Keep container sealed and avoid contact with moisture

For full Technical and Material Safety Data Sheets, please contact Top Paints (016) 362 1054 or send an enquiry to sales@toppaints.co.za