SHEEN

Hard-wearing satin finish coating.

8 Years

  •  Low odour
  • Satin finish
  • Washable and stain resistant
  • Can be tinted in a variety of colours
  • Available in white and a range of standard colours
  • 8 year guarantee
  • Long term protection against weather conditions
  • UV resistant * Exceptional obliteration and coverage
  • Maintains a satin finish over time
  • Touch Dry: 30 Minutes – 1 Hour @ 23°C
  • Recoating Time: 4 Hours @ 23°C
  • Spreading Rate: 7 – 8m² / litre, depending on porosity of surface and application

New Surfaces

New cement plaster:
Ensure surface is in sound condition before paint is applied. Allow cement plaster to cure and dry for 28 days to avoid moisture entrapment or any paint failure. Remove plaster spatter and dust. Apply Top Paints’ Plaster Primer and allow 12 hours to dry. Apply two coats Top Paints’ TREND SHEEN.

New fibre-cement, bricks and composition boarding:
Remove dust and loose particles. Apply Top Paints’ Plaster Primer and allow 12 hours to dry. Apply two coats Top Paints.

Previously Painted Surfaces

Old paint in sound condition::
Clean Surface and rinse thoroughly. Ensure that the old coating adheres to the substrate. Apply two coats of Top Paints’ TREND SHEEN.

Previously painted with solvent based product:
Apply Top Paints’ Universal Undercoat and allow recommended drying time. Apply two coats Top Paints’ TREND SHEEN

Powdery Surface:
Sand down and remove dust. Apply Top Paints’ Bonding Liquid and allow recommended drying time. Apply Top Paints’ Plaster Primer and allow 12 hours to dry. Apply two coats Top Paints’ TREND SHEEN.

Fungal growth:
Remove fungal growth by using Top Paints’ Fungal Wash. Rinse thoroughly and allow to dry.

Previously painted with solvent based product:
Strip and treat as new work.

Gypsum Plaster:
GYPSUM PLASTER IS NOT RECOMMENDED FOR EXTERIOR USE.

Interior:
DO NOT SAND GYPSUM PLASTER. Apply Top Paints’ Plaster Primer and allow 12 hours to dry. Apply two coats Top Paints’ TREND SHEEN. Refer to the Top Paints’ Plaster Primer technical data sheet for further information on this product.

Packaging
5L and 20L (white, standard colours and tint bases)

Storage
Keep away from direct sunlight, heat and severe cold Keep container sealed and avoid contact with moisture

For full Technical and Material Safety Data Sheets, please contact Top Paints (016) 362 1054 or send an enquiry to sales@toppaints.co.za