MAGNETIC BLACKBOARD PAINT
A solvent-based matt black paint that attracts magnets and is suitable to use as a school board paint.
- Suitable for use on wood, metal , hardboard and plaster.
- Excellent adhesion.
- Chalk easily cleaned.
- Dries to a relatively smooth finish.
- Lead free.
- vercoat with Top Paints’ Super Sheen or Low Sheen.
- Transforms walls to a magnet attracting surface.
- Touch Dry: 1 hour @ 23°C
- Recoating Time: 1 hour @ 23°C
- preading Rate: ± 2m² / litre
- Packaging: 1 litre packaging
- Storage: Away from direct sunlight, heat and severe cold.
Keep container sealed and avoid moisture contact.
Cement-, Gypsum Plaster, Concrete, Fibre-Cement, Hardboard:
Prime with Top Paints’ Plaster Primer.
Sand to a smooth finish, seal knots and prime with Top Paints’Pink Wood Primer.
Clean with Top Piants’ Degreaser and rinse thoroughly until a water break-free film is achieved. Sand or use scouring pads to remove all rust. Use Top Paints’ Water-based Zinc Phosphate Primer to prime entire surface.
Clean with Top Paints’ Degreaser and rinse thoroughly until a water break-free film is achieved. Prime with either Top Paints’ Industrial QD Red Oxide Primer or Etch Primer.
Previously Painted Surfaces
Old paint in sound condition:
Remove any flaking and loose paint, clean and prime with appropriate primer (as per information given above). Top Paints’Bonding Liquid can be used on very powdery surfaces. Sand surface down and remove dust before applying a coat of Top Paints’Fillercoat. Fillercoat must be left to dry for at least 4 hours.
Old paint in poor condition:
Completely strip surface and treat as new work
Away from direct sunlight, heat and severe cold. Keep container sealed and avoid moisture contact.
For full Technical and Material Safety Data Sheets, please contact Top Paints (016) 362 1054 or send an enquiry to firstname.lastname@example.org