BEST PAINT FOR ANY
INDUSTRIAL SURFACE
From General Industrial to Heavy Duty coatings, we have just the coating
for you to withstand any demanding industrial environment.
ZINC PHOSPHATE
An anti-corrosive water-based primer for use on galvanised iron and steel. Available in Red Oxide and White.
- Tough and durable
- UV resistant
- Low odour
- Rust inhibitor
- Excellent adhesion
- Good spreading rate
- Available in Grey, Red and White
- 100% lead-free
- Drying Time: 1 Hour
- Recoating Time: 2 Hours
- Application: Brush, roller or airless spray
- Application: “Ripple” roller
- Thinning: Not recommended
- Spreading Rate: 6 – 7m²/litre, depending on surface porosity
- Cleaning: Water
- Coats: 2
- Stir thoroughly with a flat paddle before use
Ensure that surface is clean, dry and sound before applying. Plaster mix must be free from loose, friable and soft material, and have a minimum thickness of 10mm.
New Surfaces
Surface must be dry, clean, firm and free from oil, grease, dust and other surface contaminants.
Unglazed Brick and Building Blocks:
Clean surface and apply TOP TEX directly.
New Galvanised Iron:
Remove grease, oil and temporary protective coating with Top Paints’ Degreaser and an abrasive pad. Rinse with clean water until water break-free film is achieved. Allow to dry.
Weathered Galvanised Iron:
Mechanically, ex. abrasive blasting, shot blasting, sanding, etc., remove oxidation and loose rust. Use either Top Paints’ General Purpose Cleaner or Top Paints’ Degreaser and an abrasive pad to clean the surface thoroughly. Rinse with clean water until water break-free film is achieved and allow to dry. Paint must be applied the same day. Apply 2 coats of WATER-BASED ZINC PHOSPHATE PRIMER.
New and Rusted Metal:
Mechanically, ex. abrasive blasting, shot blasting, sanding, etc., remove oxidation and loose rust. Use either Top Paints’ General Purpose Cleaner or Top Paints’ Degreaser and an abrasive pad to clean the surface thoroughly. Rinse with clean water until water break-free film is achieved and allow to dry. Paint must be applied the same day. Apply 2 coats of WATER-BASED ZINC PHOSPHATE PRIMER.
Old surfaces
Surfaces previously painted, with rust:
Remove all paint in rusted areas back to bare metal. Treat as new work.
Packaging
1, 5 and 20 litres
Storage
Store away from direct sunlight, heat and severe cold. Keep container sealed and avoid moisture contact.
Caution
During Winter months painting should be restricted to between 09H00 and 15H00, in Summer painting can be done between 08H00 and 16H00. Exterior surfaces – Do not paint if rain is imminent.
For full Technical and Material Safety Data Sheets, please contact Top Paints (016) 362 1054 or send an enquiry to sales@toppaints.co.za