BEST PAINT FOR ANY
OUTDOOR PROJECT

A fresh paint job has the power to totally transform the look of your house in less time
and for less cash than any other remodelling project. REMEMBER- The key to a
good exterior paint job is proper preparation.

MATT

A highly affordable, washable multi-purpose acrylic paint for use on interior and exterior walls.

12 Years

  • Can be tinted
  • Excellent adhesion
  • Matt finish
  • Interior and exterior use
  • Not recommended for bathroom and kitchen ceilings and walls
  • Available in white and standard colours
  • 12 Year guarantee for interior use
  • Exceptional obliteration and durability
  • Excellent opacity
  • Protective barrier
  • Touch Dry: 30 minutes @ 23°C
  • Recoating Time: 2 Hours @ 23°C
  • Spreading Rate: 6 – 8m² / litre, depending on porosity of surface and application

New Surfaces

New cement plaster:
Ensure the surface is in good condition before paint is applied. Allow cement plaster to cure and dry for 28 days to avoid moisture entrapment or any paint failure. Remove plaster spatter and dust. Apply Top Paints’ Plaster Primer and allow recommended drying time. Apply two coats Top Paints’ SIGNATURE SERIES MATT.

New fibre-cement, bricks and composition boarding:
Remove dust and loose particles. Apply Top Paints’ Bonding Liquid and allow recommended drying time. Apply two coats Top Paints’ SIGNATURE SERIES MATT.

Previously Painted Surfaces

Old paint in sound condition:
Clean surface and rinse thoroughly. Ensure that the old coating adheres to the substrate. Apply two coats of Top Paints’ SIGNATURE SERIES MATT.

Previously painted with solvent based product:
Apply Top Paints’ Universal Undercoat and allow recommended drying time.

Powdery surface:
Sand down and remove dust. Apply Top Paints’ Bonding Liquid and allow recommended drying time before applying intermediate and final coats.

Fungal growth:
Remove fungal growth by using Top Paints’ Fungal Wash. Rinse thoroughly and allow to dry.

Previously painted surface in poor condition:
Strip and treat as new work.

Gypsum Plaster:
GYPSUM PLASTER IS NOT RECOMMENDED FOR EXTERIOR USE.

Interior: DO NOT SAND GYPSUM PLASTER. Apply Top Paints’ Plaster Primer and allow 12 hours to dry. Apply two coats Top Paints’ SIGNATURE SERIES MATT. Refer to technical data sheet for further assistance.

Filling:
Use suitable and approved filler.

Packaging
1L, 5L and 20L (white, standard colours and tint bases)

Storage
Keep away from direct sunlight, heat and severe cold Keep container sealed and avoid contact with moistur

For full Technical and Material Safety Data Sheets, please contact Top Paints (016) 362 1054 or send an enquiry to sales@toppaints.co.za