WALL & CEILING
Matt finish product with excellent hiding power and coverage for interior use
- Excellent adhesion to ceilings
- Matt finish
- Interior use
- Not recommended for bathroom and kitchen ceilings and walls
- Available in white
- Exceptional obliteration and coverage
- Excellent opacity
- Protective barrier
- Touch Dry: 30 Minutes @ 23°C
- Recoating Time: 2 Hours @ 23°C
- Spreading Rate: 6 – 8m² / litre, depending on porosity of surface and application
New cement plaster:
Ensure the surface is in sound condition before paint is applied. Allow cement plaster to cure and dry for 28 days to avoid moisture entrapment or any paint failure. Remove plaster spatter and dust. Apply Top Paints’ Plaster Primer and allow recommended drying time. Apply two coats Top Paints’ TREND WALL & CEILING.
New fibre-cement, bricks and composition boarding:
Remove dust and loose particles. Apply Top Paints’ Bonding liquid and allow recommended drying time. Apply two coats Top Paints’ TREND WALL & CEILING.
Previously Painted Surfaces
Old paint in sound condition:
Clean surface and rinse thoroughly. Ensure that the old coating adheres to the substrate. Apply two coats of Top Paints’ TREND WALL & CEILING.
Previously painted with solvent based product:
Apply Top Paints’ Universal Undercoat and allow recommended drying time.
Sand down and remove dust. Apply Top Paints’ Bonding Liquid and allow recommended drying time before applying intermediate and final coats.
Remove fungal growth by using Top Paints’ Fungal Wash. Rinse thoroughly and allow to dry.
Previously painted surface in poor condition:
Strip and treat as new work.
GYPSUM PLASTER IS NOT RECOMMENDED FOR EXTERIOR USE.
Interior: DO NOT SAND GYPSUM PLASTER. Apply Top Paints’ Plaster Primer and allow 12 hours to dry. Apply two coats Top Paints’ TREND WALL & CEILING. Refer to Top Paints’ Plaster Primer technical data sheet for more information on this product.
Use suitable and approved filler
5L and 20L (only white)
Keep away from direct sunlight, heat and severe cold Keep container sealed and avoid contact with moisture
For full Technical and Material Safety Data Sheets, please contact Top Paints (016) 362 1054 or send an enquiry to email@example.com